Hi all,

A new and enthousiastic user with station 3050 here from Netherlands.
I've successfully installed  by system blue (PCB22.0) with a PCB23.1 H-field amplifier.
Antenna is a COAX 2-loop (1 meter diameter).

As far as i can tell the system is up and running and i am still tweaking the settings here and there.
However, from the station list it does not appear to have been using any of the data i have sent, even though quite a few thunderstorms have come close the past few days.
   
What is wrong with my setup? Do i need a different antenna (ferrite)?

Kets

Hello,
I just set up the Blitzortung lightning detector integration. I only want to be notified if the strikes are getting closer. Best way to go about doing that? 
Do you use the Azimuth sensor for anything?
Thanks in advance!

Since some days the lightning block is not showing maps any more - is this a problem of my configuration or does anyone encouter the same issue?

We had a spell of thunder in Central Scotland on 3rd May and the Real Time Lightning page indicated the strikes near me, which tied in well with the sounds. However they soon disappeared off the display, and even selecting the -24hr option did not bring them back, though I can still see the earlier ones to the east before they reached here.

I've noticed this before, strikes that were picked up in real time but then disappeared from the -1h -24h and archive pages.

Dear all,

we have a few PCB 22.0 and PCB22.1 test boards with which we tested the need for some components. It is a minimal version of a detector based on System Blue with only two amplifiers for magnetic antennas. Some SMD components were manually soldered onto these boards. It is a fully usable detector that is equivalent to System Blue in standard operation. This variant will be developed to offer a cheaper alternative entry option for participants.

The price for PCB 22.0 with preamplifier PCB 23.1 is 149 euros plus shipping. The price for PCB 22.1 with preamplifier PCB 23.1 is 199 euros plus shipping. PCB 22.2 will be available from mid-July with preamplifier PCB 23.1 for 249 euros.

Please write me a private message, if you are interested.

/Egon

the attachement shows the PCB 22.1/23.1 kit

Attached Files

Thumbnail(s)
       

Bonjour, 
Je suis intéressé par l'achat d'un "system blue".

Pouvez vous me dire quand ils seront à nouveau disponibles

Bien cordialement

Gabriel

I've noticed that on my controller's Status Page there is a graphic showing Received/ % good/ % sent over Minute/Hour/Day.

I find this very useful to see if I'm getting hits and the system is working.

I notice that after a few minutes this graphic stops updating.

If I restart my web browser (any browser) after it stops updating it actually doesn't show up.

The only way I can get the graphic back is to reboot the controller.

I'm just curious if this is normal behaviour or if it may be indicative of something wrong with settings or my controller.

Thanks,
Robert

Attached Files

Thumbnail(s)
       

I purchased a system #3024 from a gentleman in Germany.

It arrived, I have plugged it in and it seems to be working, however I have noticed that on the lightningmaps.org my system never gets a hit - i.e. I can see my station but I never have any lines nor a "green dot" saying my station has been used by the system to updated the web interface.

Since my system was orginally in Europe and is now in North America (Toronto) is there anything I need to get it up and running properly in it's new location?

Thanks,
Robert

Hola @All!

Will this seapate available Blue H-Field Preamp work with Red?

Regards
Reiner

Hello I have just purchased a second hand blue station in addition to my red 2421 and I cannot get the data on the lightningmaps.org site, it switches to the data of my red. 
And second point more hardwear, I I have channel 1C which doesn't seem to work (I changed the cable between the amp: it's the same thing and changing the ferite same thing) does anyone have an idea?

Many thanks

Jean-Sébastien station 2421, 3021