https://www.washingtonpost.com/weather/2...pped-it-d/

https://www.washingtonpost.com/weather/2...ts-wrapper

Node 1445 has been operating for a number of years. I am looking for a new home for it.

Complete self assembled system with ferrite core antennas, central unit, remote amplifier and GPS receiver.

Hi,
can you tell me what is the best connection on the blue preamp between loop antenna or ferrite antenna? it has 3 inputs per antenna E1-E2-GND

Ferrite = E1-E2 and GND what is the correct connection?

Loop E1- E2 -?
Loop E1- GND -?
Loop E2- GND -?
(after soldering the bridge under the pcb)

Thank you for bringing me some details.

kind regards

Patrick

I have tried to look at a few posts that have been moved and I can't seem to view them. It seems to suggest I don't have the permissions. One for the IT team to look at.

Well I build mine the other weekend and have had it running for a bit now. Could do with some advice on how to interpret the data I am getting so that I can improve on my results.

Not get a lot of contacts so far but I haven't mounted anything in a final location. 

I am looking to design a build a holder for the Ferrite rods, I have 3 of them and was wondering is it best to lay them in a triangle as seen on some of the manual shots or mount them at 90 and the 3rd at 90 vertically? I have a laser cutter and plan to use that to cut out the brackets but before I design them has anyone else already done designs.

            Hi, got my E-field antenna setup yesterday.

I clear coted the circuit board with a couple of clear varnish for extra protection against the elements. I protected the connectors with masking tape during the spaying.
The antenna is attached to a antenna pole on a steep high ground close my house.

Hi all,

I am exited to be performing my first test on my System Blue Station 2835.
Expect to have the antennas (E-field and H-field) installed within the next couple days.

Have a nice weekend 

Attached Files

Thumbnail(s)
   

Hi,

I recently received an invitation to participate.

I have tried to respond indicating my purchase requirements by replying to the email b...tung@ gmx . o__ but that immediately failed 

554:554-gmx.net (mxgmx001) Nemesis ESMTP Service not available
554-No SMTP service
554-Reject due to policy restrictions.


Is this the correct email address to use?  I've seen another thread here ( https://forum.blitzortung.org/showthread.php?tid=3311 ) indicating that that person replied directly an individual.

Apologies if I've missed something.

An alternative reason for failure is that I have responded from a different email address ( I registered a couple of years back using an email address from which I can no longer send ).

Thanks.

Hello

On August 14th, I received an email from Egon Wanke offering me to participate in the network, after I believe 2 years of waiting.
I replied the following week accepting with joy and specifying the material I wanted to buy and the payment method I chose. I also bought some supplies to install my future system blue.

I didn't get an answer to my first email. Since then, being a bit worried, I sent two other messages to Egon, to this day after a month and a half, still no answer!

What the hell is going on? I find this quite disappointing!