Red EField Boards

[davidmc36]

Is there any way to get the files for PCB 13 and 14? I would like to get some made. I see places that will make boards and do the SMD part.

Seems a lot of the files are purged from BO database.

TIA

D

[davidmc36]

Ooooookaaaaayyyyy.

So it seems I stumbled on the .brd and .sch files.

I guess nobody dropped by who knew the location.

The next question is, there must be some programming to be loaded onto the Atmega.

How would that happen?
If I got the boards built, will I be able to use them?
I see info about firmware for the STM32.

I was looking at a place that would make small batch boards and install the SMD components. Pricey im sure but i would really like to have the E Field. I have built a few projects like this supplied with board and SMD and I do the through hole.

[davidmc36]

...

The next question is, there must be some programming to be loaded onto the Atmega.

How would that happen?....

So the STM32 takes care of it on start-up?

"5.5.3 Start-up Sequence
After a reset or power-on, the controller initializes itself and peripherals, like CPU-Clocks, LCD,
Real-Time-Clock, I/Os, Amplifiers and USARTs. "

[davidmc36]

... small batch boards and install the SMD components. Pricey im sure but .....

Not that outrageous actually for 5 to 20 boards.

Is anybody interested if I got some made???

D