Low Pass Filter problems
#9
In my case the optional, SMD, solder on yourself, filter chips, nothing wrong with the factory mounted stuff here. DrRobin has fitted the optional chips as well but one channel, when the LP filter is enabled, is not working properly. He's confident of the soldering so suspects a board fault but hasn't had time to fault find it.
Cheers
Dave.

Stations: 1627
Reply


Messages In This Thread
Low Pass Filter problems - by DrRobin - 2016-10-20, 19:54
RE: Low Pass Filter problems - by DrRobin - 2016-10-21, 08:21
RE: Low Pass Filter problems - by allsorts - 2016-10-21, 16:34
RE: Low Pass Filter problems - by Ranieri - 2016-10-22, 07:14
RE: Low Pass Filter problems - by DrRobin - 2016-10-21, 22:17
RE: Low Pass Filter problems - by allsorts - 2016-10-21, 23:53
RE: Low Pass Filter problems - by allsorts - 2016-10-22, 18:55
RE: Low Pass Filter problems - by DrRobin - 2016-10-25, 21:23
RE: Low Pass Filter problems - by allsorts - 2016-10-25, 22:14
RE: Low Pass Filter problems - by DrRobin - 2016-10-31, 22:18
RE: Low Pass Filter problems - by DrRobin - 2016-11-02, 17:56
RE: Low Pass Filter problems - by DrRobin - 2016-11-02, 18:05
RE: Low Pass Filter problems - by allsorts - 2016-11-02, 22:04

Forum Jump:


Users browsing this thread: 1 Guest(s)