2025-08-26, 12:53
(2025-08-26, 12:08)dupreezd Wrote: Ok8LEO, first thing I will do is shorten the wires between the loop and amplifier substantially. Less of an 'antenna' to pickup unwanted interference.
I can not tell from the pictures, make sure that you use a SHIELDED Ethernet cable, no longer than 30 meters, between the amp and controller as per the published documents. Use a standard UTP cable from the controller to your router or switch.
duprees
Thanks for your feedback . The Ethernet cable is a standard UTC cable with a length of 50 cm. I will shorten the antenna cable when the definitieve position is determend