2017-09-18, 14:13
It's good comments! Correct,..
I made a real dumb error once, while working on my BLUE... I inadvertently reversed the Blue H amp and IP cables... had
some very strange issues... thought I'd blown my amp, controller and router... whew.
First, Give this system time to stabilize! It may take several minutes... I don't know why, but it does... even after stabilization it will NOT work properly until it receives and stabilizes GPS, and communicates with the server. You might have to do a 'factory reset', remove all power, wait several minutes, then do a completely cold startup with everything connected properly, and give it time to stabilize before doing anything.
Also, I note at least two colored LEDs on your build picture are reversed... no big deal, but I might review all my 'build' steps ...I generally will have another 'error' if I've found one... but I'm old, can't see, etc...
Cheers!
Mike
I made a real dumb error once, while working on my BLUE... I inadvertently reversed the Blue H amp and IP cables... had
some very strange issues... thought I'd blown my amp, controller and router... whew.
First, Give this system time to stabilize! It may take several minutes... I don't know why, but it does... even after stabilization it will NOT work properly until it receives and stabilizes GPS, and communicates with the server. You might have to do a 'factory reset', remove all power, wait several minutes, then do a completely cold startup with everything connected properly, and give it time to stabilize before doing anything.
Also, I note at least two colored LEDs on your build picture are reversed... no big deal, but I might review all my 'build' steps ...I generally will have another 'error' if I've found one... but I'm old, can't see, etc...
Cheers!
Mike
