2016-09-05, 15:11
If you are worried about plugging stuff in accidentally, then use different colored cables, put heat shrink color, or colored electrical tape on cable that has passive POE.
In the case of the Adafruit passive PoE you have adapters at each end, so unless you unplug from the adapter and then plug the cable in to device can you cause damage.
In my case the far end will only have the Blitzortung detector, so not too worried about confusion.
In the case of the Adafruit passive PoE you have adapters at each end, so unless you unplug from the adapter and then plug the cable in to device can you cause damage.
In my case the far end will only have the Blitzortung detector, so not too worried about confusion.