Low signals

[NobelsKr]

Hello,

I got my system running (RED) and i notice that my detections are low compared to others.

Know it's running but do i need to improve ?

In attach i added a screenshot

[Knolau]

I got my system running (RED) and i notice that my detections are low compared to others.

We know nothing about the settings of your station. Maybe configuration is bad, antenna not connected, very bad location. The screenshot support your statement, but does not help.

[NobelsKr]

We know nothing about the settings of your station. Maybe configuration is bad, antenna not connected, very bad location. The screenshot support your statement, but does not help.

RS232 -> board speed is 115200 Baud
GPS -> EM-406A/SiRF
GPS Speed -> 19200 Baud

Firmware is 6.20.2

Do you need more settings ? just ask 

[Knolau]

I got my system running (RED) and i notice that my detections are low compared to others.

I think, You have Green, not RED! There are jumpers  (2x4) to adjust the gain 

Yours maybe too low.

[Knolau]

Hi Kris!

Do you prefer talking by the forum

Coincidence, that i spent some time in the forum, i´m very busy. So it´s better to discuss in the forum, other people can read this and may help too.
By the way, You have private messaging disabled.

There must be instructions for green stations somethere in the net. Maybe somebody has a link.

Cheers

Knolau

[DelandeC]

And here is a link to the Green documentation : http://fr.blitzortung.org/Compendium/Doc...CB_5.7.pdf

[Knolau]

Do you need more settings ? just ask 

Gain settings? Read the manual and look at the amplifier board

It looks like your station detects just on 1 channel (red), antenna is in West-East direction. Other ferrite rod connection seems to be wrong. Just a vague speculation.