System Blue - H-field pre-amplifier
#1
Hi All,

I would like to know what kind of CAT5 cable I should use between the H-Field pre-amplifier board and the mainboard. Is it a crossover cable or straight through cable?

Thanks

Best regards

David
Reply
#2
Connect an H-field or E-field preamplifier to the board. On the connected preamplifiers the red LEDs should be on. If this is not the case, something is wrong with the connection cable. Use normal CAT cable. It must not be a crossed cable. Smile
Reply
#3
It must also be shielded. The types are listed in the instructions.
Regards,
Mike W.
Stations: 1977, 2294
Reply
#4
(2019-08-21, 16:36)mwaters Wrote: It must also be shielded. The types are listed in the instructions.

Yes,

can anyone share wiring diagram of the cable, just to make sure that the connections are correct?

thanks
Reply
#5
(2019-08-21, 18:23)davidbonnici1984 Wrote:
(2019-08-21, 16:36)mwaters Wrote: It must also be shielded. The types are listed in the instructions.

Yes,

can anyone share wiring diagram of the cable, just to make sure that the connections are correct?

thanks

It is a standard straight thru Ethernet cable.
[Image: NOAARADlogoTXT80.png]


Stations: 2100, 2954
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Photo Turn-key System Red For Sale - H-Field and E-Field - SOLD Donald.Froula 2 8,864 2021-09-24, 16:06
Last Post: Donald.Froula
  H-field pre-amplifier placement inside loops? MDMD 2 16,547 2016-10-31, 16:29
Last Post: allsorts
  Wanted Pre-Amplifier 14 PCB and Amplifier Kit (Red) Michael1976 0 7,810 2016-07-26, 17:55
Last Post: Michael1976

Forum Jump:


Users browsing this thread: 2 Guest(s)