![]() |
|
System Blue H-field only - Printable Version +- Blitzortung.org Forum (https://forum.blitzortung.org) +-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29) +--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31) +--- Thread: System Blue H-field only (/showthread.php?tid=4205) |
System Blue H-field only - gmiller43 - 2026-03-14 Hi, I recently received my system blue detector, and I was trying to get it up and running with the simplest antenna configuration. I think that is a meter long wire to use as an E-Field antenna, correct? But upon closer inspection, the rev of System Blue that I have only has a connection for the H-Field preamp connection. Is it not possible to connect an E-field antenna? RE: System Blue H-field only - GeezerD - 2026-03-14 I think you've got one of these, then: https://docs.lightningmaps.org/hardware/lightning-detectors/mini/ You're right, there's no E-field input on the little pre-amp board for System Blue Basic. I have a system blue mini, and I made two air core loop antenna, as described in this document: https://www.blitzortung.org/Compendium/Documentations/Documentation_2016-05-31_Antennas.pdf "Multi Turn.: 20 turn, Ø38cm (38cm diameter) ~ Area ~ 0.19² * Pi * 20 ~ 2,3m² (inductance ~ 500μH) Use 1mm² lacquer or plastic insulated copper" Works well enough. |