+- Blitzortung.org Forum (https://forum.blitzortung.org)
+-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29)
+--- Forum: Hardware, Software, Lightning Physics (https://forum.blitzortung.org/forumdisplay.php?fid=30)
+--- Thread: Error in PCB_20_7 (/showthread.php?tid=3228)
Error in PCB_20_7 - aeromash - 2020-06-12
When open directory "Index of /Compendium/Hardware/PCB_20_7/" , we see same file 05-Mar-2020 15:35 94992
05-Mar-2020 15:35 94992 . If I uderstand right this files must be different.
RE: Error in PCB_20_7 - gerbold - 2020-06-13
Hi aeromash,
you are right 16_2 should be the E-field pre-amp with just one channel. Refer to HW 20_6.
Please remove the links to the internal documents from the public forum.
Thanks
Klaus
RE: Error in PCB_20_7 - Egon - 2020-06-15
(2020-06-12, 06:12)aeromash Wrote: When open directory "Index of /Compendium/Hardware/PCB_20_7/" , we see same file 05-Mar-2020 15:35 94992
05-Mar-2020 15:35 94992 . If I uderstand right this files must be different.
Yes, you are right.
/Egon
RE: Error in PCB_20_7 - Ron Lowe - 2020-08-12
(2020-06-13, 04:19)gerbold Wrote: Hi aeromash,
you are right 16_2 should be the E-field pre-amp with just one channel. Refer to HW 20_6.
Please remove the links to the internal documents from the public forum.
Thanks
Klaus
But the link to the schematics is already public on the main website.
Look in the section:
https://www.blitzortung.org/en/cover_your_area.php
Then follow the link to 'Assembly Instructions System Blue'. In section 2.2 the link is right there.