cannot log in - Printable Version +- Blitzortung.org Forum (https://forum.blitzortung.org) +-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29) +--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31) +--- Thread: cannot log in (/showthread.php?tid=3091) |
cannot log in - opadavis2 - 2019-09-15 I have had a station for a few years as user: opadavis. Today I cannot sign in. I have requested a new password but this does not work. I have had to generate another name and email address in order for me to ask for help. My day started with getting a new modem that has not yet assigned an IP address to the lightning reciever. I was able to find it (http://192.168.0.219) for the older Cisco DPC3848V, but cannot find it in the new Hitron 2250. Please help. RE: cannot log in - mwaters - 2019-09-15 What can you not log into? Your controller interface or a web site? RE: cannot log in - opadavis2 - 2019-09-15 (2019-09-15, 04:46)mwaters Wrote: What can you not log into? Your controller interface or a web site? If I were to sign out of "opadavis2", I would not be able to sign in under my original user name "opadavis". When I ask for a new temporary pass code, I am told that code is not valid. As for not being able to monitor and change settings on the interface, I will again go through the initial steps as stated in the Assembly Instructions for Blue. This could be related: I just looked at Lightning Maps.org and it shows my station sending signals all night and being active. My station was off all night. Peter RE: cannot log in - mwaters - 2019-09-15 Maybe the problem is that you have two user names. Although I have two stations, I have only ever had one user name and password. As for your idle station showing strokes, that is a known bug. Those strokes are from someone else's station. RE: cannot log in - opadavis2 - 2019-09-15 (2019-09-15, 19:24)mwaters Wrote: Maybe the problem is that you have two user names. Although I have two stations, I have only ever had one user name and password. Thanks Mike, I have had only one user name for the past 2 years, until last night, when I had to create another one in order to get access to the forum to ask for help. Peter RE: cannot log in - cutty - 2019-09-16 (2019-09-15, 20:27)opadavis2 Wrote:Pete, I also could not reset your password for opadavis, for some reason.(2019-09-15, 19:24)mwaters Wrote: Maybe the problem is that you have two user names. Although I have two stations, I have only ever had one user name and password. I merged the opadavis user to opadavis2, so please continue with the new id, opadavis2. ...all your posts, etc should now be in new forum user opadavis2 Strange... Mike |