Blitzortung.org Forum
Registering new system question.. - Printable Version

+- Blitzortung.org Forum (https://forum.blitzortung.org)
+-- Forum: Public Forums (https://forum.blitzortung.org/forumdisplay.php?fid=29)
+--- Forum: General Discussion (https://forum.blitzortung.org/forumdisplay.php?fid=31)
+--- Thread: Registering new system question.. (/showthread.php?tid=1467)

Registering new system question.. - Aythya - 2015-08-18

Good afternoon fellow "Blitzortunger's"!

I am in the process of commissioning a newly built system "Red" lightning detector, and have a question in regards to that.

I already have a user ID number and account.  I have tried repeatedly to enter my 24 digit system ID hex number (without dashes) into the appropriate field.  However, when I click "OK", the field simply clears, and the system remains unregistered.

Is there something I am missing here?  I would think that is all that is involved.  Perhaps new system registration has been temporarily suspended?

Thanks in advance, and I look forward to participating,

Cheers from Canada

RE: Registering new system question.. - DelandeC - 2015-08-18

So you do not see the message "Processor ID xxx has been added for user yyy"?

If there is no spaces and no dashes then there might be something wrong going on.

Wait for Egon or Tobi Wink

RE: Registering new system question.. - Aythya - 2015-08-18

Well try the easy things first, as always Wink

I just gave the unit WAN access, and it immediately registered itself automatically!!  Not only that, but all system details immediately propagated to the website as well.

Very, very cool.

I am now officially station ID #1384!

Now, to start testing the antennas...  Smile

RE: Registering new system question.. - DelandeC - 2015-08-18

Ok cool.

Have fun  Lightning

RE: Registering new system question.. - Aythya - 2015-08-18

Thank-You.. I am indeed having fun.  If this doesn't confirm my Geekiness, nothing will..

RE: Registering new system question.. - africaone - 2016-05-11

(2015-08-18, 15:09)Aythya Wrote: I already have a user ID number and account.

Dear All, new member here with freshly completed system red - ready for deployment -all preliminary tests passed first time Rolleyes , although the smd soldering was a first and took a while to become comfortable.

Just wondering if anyone can share how / where to get a "user ID number and account" to proceed with firmware, software test and connectivity?

Thanks!

RE: Registering new system question.. - cutty - 2016-05-11

(2016-05-11, 11:58)africaone Wrote: [quote pid='10374' dateline='1439910555']
Dear All, new member here with freshly completed system red - ready for deployment -all preliminary tests passed first time Rolleyes , although the smd soldering was a first and took a while to become comfortable.

Just wondering if anyone can share how / where to get a "user ID number and account" to proceed with firmware, software test and connectivity?

Thanks!


Send a short Email to blitzortung@gmx.org requesting a new user account for the network... A user account here on the forum is not necessarily a Network User account.. mine are different, for example.
You might refer back to the RED Documentation, section 5 (page 65) for instructions on activating your station, and registering your station.
http://blitzortung.org/Compendium/Documentations/Documentation_2014-05-11_Red_PCB_10.4_PCB_12.3_PCB_13.1_PCB_14.1.pdf?1462969692

Welcome Aboard!

RE: Registering new system question.. - africaone - 2016-05-11

(2016-05-11, 12:39)Cutty Wrote:
(2016-05-11, 11:58)africaone Wrote: [quote pid='10374' dateline='1439910555']
Dear All, new member here with freshly completed system red - ready for deployment -all preliminary tests passed first time Rolleyes , although the smd soldering was a first and took a while to become comfortable.

Just wondering if anyone can share how / where to get a "user ID number and account" to proceed with firmware, software test and connectivity?

Thanks!


Send a short Email to blitzortung@gmx.org requesting a new user account for the network... A user account here on the forum is not necessarily a Network User account.. mine are different, for example.
You might refer back to the RED Documentation, section 5 (page 65) for instructions on activating your station, and registering your station.
http://blitzortung.org/Compendium/Documentations/Documentation_2014-05-11_Red_PCB_10.4_PCB_12.3_PCB_13.1_PCB_14.1.pdf?1462969692

Welcome Aboard!

[/quote]
Great Stuff! Once the system red firmware was installed it all all pretty much automatic from there. Only problem is that the firmware link is not referenced anywhere I could find it...
http://tracker.blitzortung.org/firmware/
Station 1445 is now online! 25% more stations now in Africa! Yay! (still cannot believe that this all went so smoothly without any hardware problems).
Still need to connect the antennae and house the unit in a suitable box. Hope to get this done on the weekend.
Excited!

RE: Registering new system question.. - Knolau - 2016-05-12

Great! I watch the african stations, i have a bookmark for this:

 Afrika+