Station Isn't Recognized. Not on List. ETC
|
Station Isn't Recognized. Not on List. ETC
|
Hello,
Could I be upgraded to participant status. User name: SA2CLC UserID : 2353 Station ID 2969 Location, Sweden //Tommy
Stations: 2969
2022-07-27, 18:46
Hello, please could I be upgraded to participant status also, and combined two profiles?
User's numbers: 2351 and 2349 User's names: Vladimir and VladimirZ Stations: 2891 and 2890 Region: Europe (Saint-Petersburg and Demyansk) Thank you! Vladimir
Stations: 2891
2022-07-29, 22:58
(2022-07-27, 18:46)Vladimir Wrote: Hello, please could I be upgraded to participant status also, and combined two profiles?Do not have a forum user 'VladimirZ' to merge. For station assignments On the BLITZORTUNG owner's pages: For the station list, follow this to delete and reassign one of the stations to the chosen userID WHICHEVER station assignment you wish to remove: example, station 2891, user 2351. Login as your 2351 credentials, delete the station 2891. Logout Login as 2349 credentials, ADD station 2891. Both should now be accessible with 2349 credentials, and list as owner 2349. This SHOULD, but may not follow into the lightningmaps.org database, but the computing servers BT will update at some point. Cheers! Mike Mike
2022-11-05, 20:55
Hi, please could I be upgraded to participant status?
User name: Huxley Station: 2510 Region: Europe1/2/3
2022-11-05, 21:54
(2022-11-05, 20:55)Huxley Wrote: Hi, please could I be upgraded to participant status?Done. Please see this thread, ASAP: https://forum.blitzortung.org/showthread.php?tid=3648
2022-11-10, 20:42
User ID CT4RK
Station number 1846 No GPS No send data permanently in IDLE. No PPS LED active. Since Oct 30 05H45
2022-11-10, 22:23
(2022-11-10, 20:42)radiofarol Wrote: User ID CT4RK Please see this thread https://forum.blitzortung.org/showthread.php?tid=3648
2022-11-11, 00:22
(2022-11-10, 22:23)cutty Wrote:(2022-11-10, 20:42)radiofarol Wrote: User ID CT4RK
2022-11-11, 00:37
The problem is solved. Something strange happened because I couldn't update the firmware! always got an error. I had use the STM32 cubeprogrammer connected by USB, and remove the 9.2 firmware before reload the 9.3. After clean the old firmware (erased it with the STMcube) I load the 9.3 and Then everything was working correctly.
I didn't understand what happened with the system. Some "sand in the gear" blocked the system, and only with the erasure of the previous firmware it was possible load the new firmware, but anyway now it is OK. |
|
« Next Oldest | Next Newest »
|
