System Blue Order Status 12. August 2016

[zdenekjanis]

Ok, the possibility of placement is possible anytime in the future.

[IZh]

Does anyone want to order a station in Russia?

Hi. I want.

[Viinanen]

Hi,

Ordering Queue and Procedure might be the same if I want to renew my System RED (#683) to System Blue?

I already sent post via that cover your area link.

Cheers.

[readbueno]

I have a System Blue that I am thinking of selling if someone is interested.  I ended up with a contract deal with USPLN and do not need two systems (also never finished the antenna build).  It is FULLY ASSEMBLED and comes with the power supply, GPS Antenna and I even have an almost fully assembled field antenna with all the windings complete.  Please see the photos and if interested, let me know ASAP with an offer.  I would require PayPal payment or money order for quick shipping.  I have a few other people interested from other boards so I am not sure how long I will have it!

Best,

Jeff

PM Me

Hi Jeff, I am in a low coverage area in the North-west of Spain and if this system is still available I would be very willing to buy it.
Kindest regards,

Brian.

[readbueno]

Hi All, My Kit arrived yesterday and this evening I soldered in the components that came with it.
Except the LEDs?
3 x LED red
2 x LED green                        
1 x LED yellow
1 x LED blue
I finally had an empty bag, but I was missing the LEDs. (You can't imagine how disappointed I was. )
Reading through the instructions again I discovered that they are part of the enclosure box that I did not order.
So now I am stuck.
I presume that these LEDs are needed for the kit to function? (It does not give any details on type?)
Maybe on Monday I can pick up these at the hobby shop in the city. I do not wish to buy hundreds of them!
However, I would like to make the suggestion, to save anyone else this inconvenience:-

That as these LEDs are soldered on the main board, they should be included along with the rest of the components that fit on the main board.

The few extra cents that these would cost to include in the components bag is negligible compared to the price of the kit.
The inconvenience for someone like me that lives in the country and has to rely on public transport, (only three buses per/day and only two at weekends and holidays!?!) is really quite considerable.
Thank you.

Brian.

[robo]

Without eclosure, you don't need extra LEDs. There are already LEDs soldered on the controller PCB.

CU Robo

[readbueno]

Without eclosure, you don't need extra LEDs. There are already LEDs soldered on the controller PCB.

CU Robo

Thank you Robo, Not being someone current with electronics, I built the kit by following the pictures!
The last time I soldered anything, Diodes were in glass bottles, and so recognising smd LEDs as opposed to the other smd components would not be my forte.  
So now having that answered I will apply some power, and see if anything lights up.
Getting there slowly.

Brian.

[tbitson]

Jeff - is it still for sale?

[readbueno]

Without eclosure, you don't need extra LEDs. There are already LEDs soldered on the controller PCB.

CU Robo

Thank you Robo, Not being someone current with electronics, I built the kit by following the pictures!
The last time I soldered anything, Diodes were in glass bottles, and so recognising smd LEDs as opposed to the other smd components would not be my forte.  
So now having that answered I will apply some power, and see if anything lights up.
Getting there slowly.

Brian.

O.K. Well, it did not blow-up! The Leds seem to be sensible, judging from other peoples video and the voltages appear to be about right. 
I have a external GPS antenna on order from eBay and it should be here this week, the GPS does not lock at all at the moment, even with a passive improvised patch indoors.
Thanks to everybody who answered my questions, I have read a lot of forum posts and I was expecting the worst, but so far I am content with how it has gone, so far!
Kindest regards,

Brian. 

[TAGood827]

Well, looks like I won't be getting a System Blue as someone else in my town already has a system up and running so that would put me at the bottom of the priority list since my area is covered.


Is it possible to make contact with the station owner? I would like to see the system in person.

Station 1781 in Royersford, PA. I live on Chapel Rd.

Thanks,


Tim