|
System Blue Order Status 12. August 2016
|
2016-06-08, 10:49
(2016-06-08, 10:30)ftrueck Wrote: Would it be possible to get a complete kit? I mean as much hardware as possible so that I don't have to order all bits an pieces from different suppliers. Read the description on the first page... everything's there.  (2016-06-08, 10:30)ftrueck Wrote: Would it be possible to get a complete kit? I mean as much hardware as possible so that I don't have to order all bits an pieces from different suppliers. (2016-06-08, 10:49)Jorgeminator Wrote: Read the description on the first page... everything's there. Let's see if this helps: Please read everything in the first post, that Jorgeminator refers to! Then, when availability is announced, suggest you order in this format: If you want everything (Except you must get elsewhere: *GPS antenna, *power supply, *cables, etc and you must fabricate a suitable piece of *wire for E field probe  _____________________ "Items 1-18 Basic Kit Complete total cost (Euros) *Item 19 (2 or 3) each Ferrite Antennas + total cost (Euros) Item 20 (8) Test Connectors SMA (optional ) + total cost (Euros) Item 21 (4) Filter ICs (4) (optional) + total cost (Euros) Items 22-30 Housing components (optional) + total cost(Euros) Sub-Total: (Euros) + Shipping, etc: (Cost Euros) TOTAL________________ The * parts get you operational, along with the *items in RED. Items 2-18 are the loose parts you must install, included in "Basic Kit" You do not need Item 19 if you are going to build your own H field loops. The USB connector, couple of other parts, may come preinstalled, so the initial firmware could be loaded prior to shipping. Watch this thread! When Kits are again available, go ahead and just submit an order as the instructions indicate in first post! Egon will notify you if order accepted, with instructions on how to pay, etc. 
2016-06-08, 15:59
2016-06-08, 23:21
(2016-06-08, 12:05)Cutty Wrote: "Items 1-18 Basic Kit Complete total cost (Euros)As long as I'm not allowed to use my own prices, why do I have to calculate the prices??? If I were going to a shop and had to calculate the prices for the for the goods they are selling, this definitely would be the last time I went to the shop. Just my thoughts on this so far... (2016-06-08, 23:21)ftrueck Wrote:All of is who have operating stations have used this ordering system. It's a bit awkward from some points of view, perhaps, but quite simple.(2016-06-08, 12:05)Cutty Wrote: "Items 1-18 Basic Kit Complete total cost (Euros)As long as I'm not allowed to use my own prices, why do I have to calculate the prices??? You asked how you could get a complete kit, without ordering bits and pieces from several suppliers. I just showed you. You get the prices from the order list, referenced in the first post, which it would be a great idea to read again, as mentioned to you at least twice already.  It's much simpler than getting this system online, and optimized for best operation, locating noise sources, finding best location, etc. This is not plug'n'play technology.If you want the basic boards with SMD's, only, and want to obtain all the other parts at your prices from your sources, your order would be simple Item 1 Circuit boards only (cost from the order list) + shipping (from the order list) Total.. Then Egon will send you a response.. Cheers!
2016-06-09, 03:44
ftrueck
If I were going to a shop and had to calculate the prices for the for the goods they are selling, this definitely would be the last time I went to the shop. Just my thoughts on this so far... One difference is this is not a shop doing it to make money. Its people doing stuff in their spare time to help a community. if they just shipped the same stuff to everyone it would be easier. But by giving people the capability to customise the order greatly increases the number of order configurations and increases the complexity of order fulfilment.
2016-06-09, 12:05
(This post was last modified: 2016-06-09, 13:52 by JiPaul B..
Edit Reason: added date of quotation
)
(2016-05-03, 07:17)WX3080 Wrote: (on May 3rd) Hello WX3080, What about (if I refer to the order list of 25. April) the component DA103C ? It is not in your basic list. And is it possible to obtain the LHL08TB332J from Reichelt too (I'm trying to minimise the shipping cost for France) ? JiPaul.
2016-06-09, 18:51
Received mine today. Unfortunately 8 MHz cristal is missing
I'll try to find one with I get some free time
Stations: 3207
2016-06-09, 19:19
2016-06-09, 19:42
(This post was last modified: 2016-06-09, 19:45 by Jorgeminator.)
(2016-06-09, 18:51)Joel Wrote: Received mine today. Unfortunately 8 MHz cristal is missing Still eagerly waiting for my station. It should be in the first set of 30 which was sent out last week, considering that I probably was one of the first people to order. I wonder how long the trip takes from Germany to Finland. This is where a tracking number would be extremely useful. For what I know, the package could be sitting at the postal office without me knowing anything about it, if they've managed to lose the notice of arrival. But I'll just have to wait, I guess, I'm not gonna interrupt Egon during these busy times. 
|
|
« Next Oldest | Next Newest »
|
