![]() |
|
High field RJ45 - Printable Version +- Blitzortung.org Forum (https://forum.blitzortung.org/mybb) +-- Forum: Public Forums (https://forum.blitzortung.org/mybb/forumdisplay.php?fid=29) +--- Forum: General Discussion (https://forum.blitzortung.org/mybb/forumdisplay.php?fid=31) +--- Thread: High field RJ45 (/showthread.php?tid=2303) Pages:
1
2
|
RE: High field RJ45 - kevinmcc - 2018-06-14 (2018-06-10, 18:05)mwaters Wrote: It is no longer recommended to shield the LAN cable. But as you say, the H-field cable must be shielded. Only post I see about this from Cutty was a suggestion for troubleshooting. Even in that post he said he did not believe the shielded LAN cable was causing the noise. I use as shielded LAN cable, I have no issues. My thoughts have been to use shielded to contain the rf signal in the Ethernet cable and not radiate to the antennas. RE: High field RJ45 - JupiterJoe - 2018-06-14 (2018-06-11, 00:22)Norquay Wrote:(2018-06-10, 18:01)gerbold Wrote:(2017-08-25, 18:30)Banff Wrote: New sys blue kit builder here, looking for help with the 3 RJ45 connectors. Seems the front panel space for the Highfield RJ45 connector is smaller than the other RJ45 space. Just wondering if I am missing something, or if the Hf gets a different style of connector. Thanks. Jt Looking at your last signal sent to lightningmaps.org, you seem to be getting some heavy interference. Check for cfl lightbulbs, some flat screen tv’s, power supplies, etc. if you have a portable AM radio, you can walk around the house with it on and pinpoint a lot of noise sources. I had a flat screen LCD tv that would render the system unusable throughout the whole house! I replaced it with with an LED tv and all was well. Good luck!! |