2018-06-23, 10:14
I have a freshly built System Blue, undergoing initial testing.
I have created my user account, upgraded the firmware, and my system is now running 24/7 with a reasonable GPS signal.
As I am not generating any useful data, I have switched to MONITOR mode.
Problem one: I can't see my own details in the station list.
Details: Station 2241, City Bristol Central, Country United Kingdom.
Problem two: I can't see any signals beyond the internal noise floor. (And the internal test signal)
There is power to both pre-amp cards, but no signal pick-up. With solar-electric panels nearby, I would have expected SOMETHING on the E card
It is going to be something dumb in both cases. I will find them in the end, but would appreciate some pointers.
Many Thanks
Kingfisher
I have created my user account, upgraded the firmware, and my system is now running 24/7 with a reasonable GPS signal.
As I am not generating any useful data, I have switched to MONITOR mode.
Problem one: I can't see my own details in the station list.
Details: Station 2241, City Bristol Central, Country United Kingdom.
Problem two: I can't see any signals beyond the internal noise floor. (And the internal test signal)
There is power to both pre-amp cards, but no signal pick-up. With solar-electric panels nearby, I would have expected SOMETHING on the E card
It is going to be something dumb in both cases. I will find them in the end, but would appreciate some pointers.
Many Thanks
Kingfisher